Contoured Card Scrapers & Small Diameter Burnishers

Reach into tight coves and around radiused shoulders with Blue Spruce Toolworks' Contour Scrapers. Grain lifting and tool marks never seem to happen in convenient spots. They seem to prefer the bottom of grooves and inside tight corners.  Going after these blemishes with abrasives presents some challenges; most notably not destroying the carefully cut details. Here's a pair of scrapers that will change the way you approach surface preparation for your flawless finish. Our Contour Scrapers have 4 half-round shapes and 4 90° arcs giving you the shapes you need to clean beads, round-overs and coves. The large scraper has 1/2", 5/8", 3/4" and 1" diameters and the smaller one has 1/8", 1/4", 3/8" and 7/16".   

Blue Spruce Contour Scrapers are milled from the same .062" 1095 spring steel used in all BSTW Card Scrapers. These extra-thick scrapers won't flex and chatter, and they're easier to burnish than typical thin scrapers. The edges are carefully machined on high-speed CNC mills, keeping the edge perfectly square to the blade and delivering a polished finish that's ready to cut…with or without burnishing. 

Speaking of burnishing…we've made two new small-diameter solid carbide burnishing tools designed to pull consistent, razor-sharp hooks faster and easier. The burnishers are available in your choice of wood for the handle: Resin-Infused Curly Maple or Bolivian Rosewood. 

Please allow 6-8 weeks for delivery.